Based on the Freescale MPC5534 32-bit microcontroller, the M460 features 2 CAN interfaces and 53 standard input/output functions via two 40-way connectors. The precision analogue functions include direct support for RTD sensors and thermocouples, while the configurable high current switching outputs support injector, spark and PWM drives.
Typical applications include; diesel after-treatment control, transmission control and complex ancillary vehicle functions.
At additional cost it is possible to build options that will modify the hardware specification within certain limits.
Pi Innovo engineering services can rapidly develop custom ECUs based on the resusable block designs within OpenECU.
- Daughter card slot
- 128K EEPROM
- Wakeup from CAN interrupt
- Secondary microprocessor
- Simulink™/RTW based development platform
- Simulink™ RTW-Embedded Coder blockset, as well as a C API function library to support C-language implementation of code (or TargetLink™)
- Reprogramming via CAN using CCP
- Calibration: ATI Vision™ or ETAS INCA™
- Processor JTAG port accessible internally
|Actuator Supplies||1x 26A (uses 4 pins)|
|Sensor Supplies||2x 5V@250mA (VM)|
|Communications||2x CAN 2.0|
|Single-ended||14x 12-bit unsigned (+ 5x selectable from # ) (+ 2x selectable from & )|
|Differential||1x 12-bit unsigned (2x &)|
|RTD Sensor||11x 12-bit unsigned|
|Thermocouple (type K)||2x 12-bit unsigned|
|Digital, Frequency, PWM||5x 0V to 5V (#) 5x 0V to Vpwr|
|Low side GP, PWM (SM, VM, CTM)||3x 2A 3x 8A (+1x 5A selectable from $)|
|Low side GP, PWM (SM, VM)||2x 100mA|
|Low side GP, Spark (SM, VM, CTM)||2x 2A 1x 8A|
|Low side GP, Injector (SM, VM)||4x 5A peak/ 2A hold ($)|
|Internal Features||Daughter board slot|
|Optional Features||128K EEPROM Watchdog processor CAN wakeup|
|Vibration||6g random RMS|
|Environmental Protection||IP68 Hermetic Seal|
|Location||Engine Compartment/ Chassis|
|Supply Voltage (normal operation)||7 - 36V|
We are interested in hearing from you.
Tell us what challenges you are facing